Cosmos Case


Manufacturer: Coolermaster
Availability: Usually ships in 24 hours

List Price:$309.69
Our Price:$189.99
buy

Features:
  • Soundproof materials applied to build a quiet environment
  • Sound barrier design reduces vibration for silent operation
  • Dual bottom air intakes to enhance air flow and reduce system noise
  • 6 aluminum detachable hard drive modules with ventilation holes for optimizing cooling
  • Side removable VGA cooling tunnel to advance thermal airflow

Description:



Cosmos Case
Reviews:

starsNearly Perfect
This is a terrific case that is nearly perfect. What would have made it perfect was if it had active cooling for the hard drives. Out-of-the-box, the case has no fan directing air over the hard drives. What that means is that if you have multiple hard drives--I have four installed so far--those hard drives will run hotter, which may negatively affect the drives. The solution (which is more of a preventative measure) is to move the snap-on intake fan with bracket from the bottom of the case to over the hard drive cage, which reduces the number of expansion slots, and to obtain another 120mm fan to replace the intake fan at the bottom of the case. Otherwise, the case is perfect.


starsCoolermaster Cosmos - case of Kings!
OK, I've been an Antec case guy for a long time. I was afraid to try another brand. Asus motherboards and Antec cases were my staple for 3 systems that I've built. I read about the Cosmos in Maximum PC and it looked great on paper, so I decided to take the risk. It was worth it. This is the best case ever! So well thought out and easy to use. Double check your motherboard standoff height though. I had to go larger than the included stand-offs. This case made my system assembly a breeze. The hard drive drawers are great, the optical drive push button (no screws) mechanisms are great. Even the built in lifting handles which you'll need. She is hefty at about 40lbs! But beautiful in craftsmanship and build, and almost silent running two WD Raptor X's and all kinds of hardware. You will not be dissapointed, and you'll never build a system faster. It's almost like the case does it for you. Cool wind tunnel feature too, that really works! This is the one and all in aircraft quality aluminum. It's like working on an F4 Phantom.


starsVery nice case
It is one of the nicest cases that I bought. I bought the point of right for step less than $650.00. This case cost less than $175.00. Quality is large, large, open, quiet and easy to install all. I will have this point of right during years to come. Strongly recommend for the play or the media center beside your TV.


starsAWSOME CASE
EC CASE is killer that it will be habit painted its to look at rough and large


starsCosmos Case Awesome!
This case is a great case. Excellent cooling and space along with layout. Easy to stucture cables and for a clean layout. I would buy a Cooler Master


starsBeatiful case but too weak airflow for those ppl like to Overclocking their component
Pro: The organized case, less cumbersome, more part, nice device, pretty design, solid, looks at little traditional little, better for no matter whom have the pieces of furniture of glass and very large. Support all the TECHNIQUE, cooling by water, even the largest cooler of central processing unit of treatment, principal Germin fresher 2. Very quiet with him ventilator of case, and better for all these manufacturer of music which needs a very good case, assistance to maintain your computer composing to also clean. Swindler: the ventilator of case is elasticity really weak a flow. 41CFM for each one only, ventilator of catch is thus suk that it just can blow a piece of paper in the sky during short time, and in the very short distance. I must put a good superb ventilator of case for the catch in the subsistence of order my fresh system.


starsHigh quality, spaceous and quiet. A beautiful furniture addition!
I did not seek a new case when one of the competitors of the Amazon, by the intermediary of an email of sale, brought fresher principal cosmos to my attention. Other side, I had looked at all my life for a case like beautiful, roomy and peace as this one. All research that I made on line, and there are many places which have the characteristics, starting with the proper Web site of the fresher Master, and a certain number with reviews, convinced me it price were valid for what will be probably my last case of computer. Moreover, the Amazon had the best price. I placed my order late Sunday before Thanksgiving, tie profit of free forwarding, and was agreeably astonished and very happy when it arrived Wednesday (before the holidays)! The box of the manufacturer comes with an external casing from forwarding, which I am astounded arrived as well as the box, since there was nothing holding it in place. Packing is proportioned, and there was no damage beyond some with the casing of paperboard. The optimum use is made internal spaces pack (skin read of sight) the smaller parts, and that took one moment to me to locate very mentioned in the list of the parts. How lucky that my company drew aside us as of the access Wednesday, because I could not wait to obtain this beauty at the house. The case comes with four ventilators of 120mm (4.72") installed. One in the base, one with the back with respect to the ventilator of central processing unit of treatment, and two in the top. There is a sufficient package of material in the form of bearing case additional (announced like complimentary ticket) containing a ring of key of screwdriver, cable clamp, tie goes up, of the spacers of mother chart, and all the screws for the mother chart and the peripherals which you could have need. Not that you need a too great number for peripherals, as I mention later. Nonsure either, where to keep the additional bearing case. The case is larger than you would envisage for a case of computer. However with 23.5"c' is entirely equal tower which it replaces, it is two appreciably broader (at 10.5"), and the deeper (longer?) (to 24.7") that the case of turn. The lower rails provide the sufficient abutment and supplement well both rails/handles higher which facilitate moving the case much than the majority. They are also very convenient while turning the case on its side with work on the intestines. The completion is a beautiful aluminium acrylic resin combination and black machined, with a panel before black mesh behind the door before reversible. The side panels are normal case. They release simply by raising the suitable lever on the back, and are raised then to the top and to outside disengage the lower lip of the base. Inside, there is more space than you will be able with what to make. For me, the removal of the memory does not require any more to remove a disk drive initially! In fact, my full mother chart of ATX has now full six inches are released between it and the hard orders. Concerning the hard orders; a reason of the increased width, must adapt to assemble the hard orders intern the vertical one in the case, using the supports of HDD which each one are fixed by a screw of finger-turnable. There are six such supports. The orders go up on the edge, using four special screws (provided) which place by insulating guns in the support to attach the order. The case adapts to 5 X the orders exposed by 5.25", or makes it possible a compartment of 5.25" to be employed to install an ordering of 3.5". The support and the control board are given for the 3.5: order. However, the fresher main thing "highly recommends" the low exposed compartment (5.25") not to be employed to install any device which is larger than 3.5" "to guarantee the optimal thermal execution for HDDs". The assembly of the order of 3.5"est crafty one, and requires patience. See to them my notes later. The exposed orders of 5.25"ne go up simply while tightening a hook of button to release or engage two pins of positioning - more screw! I was at the beginning taken the aback when I noted that the food of energy goes up in the corner postpones lower case Than the difference of my preceding cases of turn where it was installed with the top drawing the hot air from the central processing unit of treatment, the fresher main thing, in my opinion, placed the block alim. in the ideal position, to where it neither adds, nor is affected close pack heat. Air is drawn from outside by the bottom of the case, and exhausted out of the back. The placement of ventilator is ideal, with a ventilator on the bottom presenting the fresh air, one exhausting with the back, directly with respect to the ventilator of central processing unit of treatment, and two exhausting starting from the top, where one expects that the hot air emigrates. The side panels in right proportion are upholstered with the equipment of sound-proofing. All the ventilators function with the low T/MN, and the total effect is a system which is appreciably quieter than my old woman tower with her three ventilators of 3". Definite more is the connectors exteriorized on the panel (really higher) plane. The cables included with the case enabled me to connect the four ports previously unutilised of USB on my mobo of INTEL DP965LT. You would think that six who are exteriorized by the intermediary of the panel postpones are enough, but I firmly added to my peripherals of USB, the point where the four are a welcome addition! I could also connect the unutilised connector 1394 on my mother chart by using the provided cable, and found an unutilised port of SATA (cable of eSATA provided) so that I now have each three left type available on the plane panel. The following bear mentioning, but does not reduce the beauty of the case, or my reward of 5 full points: 1) the assembly of the exposed 3.5"a the order is crafty one, and requires much patience, due to the tiny screws which enter the rails of support. The hook with push-button can easily be removed for this exercise, so that the side screws on the left put out of box more easily are inserted. Not also for both on the right side, where the tiny screws must have passed by the tiny holes in a metal dish in order to kiss by a second dish in the supporting frame. I dropped multiple times from each screw, which made them disappear between the metal dishes and required to roll the case to introduce them into places where they could be required using a magnetized screwdriver. Certainly a sector for the improvement. I do not project to replace this order any time soon. 2) the buttons on my SoundBlaster Audigy 2 exceed, and do not allow the door before being closed. This returned necessary to remove in a permanent way the door, which is a pity. I asked principal fresher if they have a solution for this exit. 3) hardly a complaint - the RC-1000 has less state orders than my old case. Moreover, although principal claims fresher 5 exposed compartments of 5.25", they recommend also against to employ the bottommost like anything but compartment of 3.5". Always, I can live with compartments of drive of 4 X of 5.25"au place of five. 4) I would like a mask dust-protecting for the exteriorized connectors of front panel. This would also help to keep my old two year old grandson to press on the button of power, which he likes to make!


stars*UPDATED* WITH A HD FIX! Sleek, beautiful case that shouts quality and craftsmanship
I basically divide cases into 3 types: 1. Economic cases which are used to hold only your material. 2. The case type of Gamer can be cheap or one of finest on the market, but them all the devices of offer which return their conspicuous, like windows, lights, etc... 3. Cases of luxury that I definite as cases which full, are very well built and made materials of higher end, but am more artistic and elegant that cases of gamer and am adapted for your registered office to your office of corporation. It is one of the finest cases "of luxury" which I ever established a system inside, and I built much more than 50. An aluminium skin around with the noise blocking the material installed of the factory is right the beginning of a long list of devices of quality. I would like to have 1 or 2 5 compartments of 1/2, but it is more than one personal preference. Above that, it is a full and astounding case (much thus at the person) which will leave with the majority purchasers the contents with their decision to buy this one. UPDATE: After having established several systems in this case for customers, a serious straw became very obvious. The compartments of HDD (order lasts) act basically right like mini furnaces of toaster on the orders due to the design and the lack included of any ventilation or cooling. After having made a system duel of OS install on a computer, both installed (Raptor 150' S) were thus hot buckling you could not hold them in your hand for the surplus a second. REMEDY: Normally I would cease employing a case with a straw like this, but I like this case so much that I decided to seek a solution in the place, and to found large if you SPRINKLE FRESH your PC. Obtain in Koolance Hydre-Pak of soft cooling hard drive # HD-50-L06 (HD)for each order. The adjustments of cooler enters the order and the Juste removeable of plate and adjustment of hard drive again the slit. You CANNOT use the cooler duel of drive of Koolance due to the manner that the compartments of hard drive are designed on this model. This solution enables you "to tighten" Hydre-Pak of cooling by water between the HDD and the plate and to maintain the relations of water easily available on the back. I sprinkle fresh all my systems, and this solution transformed a serious overheating and the killer of HDD in temperature 20-24 constant reading on the hard orders constantly (readings of Koolance Exos 2 LX with the idle and the heavy and supported system examining)! If your step until speed over time, that is a pretty impressive range for a hard order under the heavy use. Went from a problem to positive if you decided to employ cooling by water on your new installation. If your step cooling by water, does not disturb too a long time front to find a good solution of air or you will replace your hard orders and will have the enormous headache to reinstall all behind on the new ones. Extreme high times will be an enormous burden the finished time of your HDD if it does not strike them out earlier than moreover later and a source of high temperature inside your case does not cause which makes all the ventilator cooling just only much more ineffective. The high output Raptor 10.000 leads me employed the product more heat than the normal 7.200 orders thus the problem cannot be as an end by using the majority of the hard orders, but it will be always a question which must be tackled early or late.



More Products:


--end of Cosmos Case